May be shown with optional equipment.
| DIMENSIONS | |
| Seating | Seating for 5, + Gunner seat + Option for rear facing seat for up to 7 personnel. |
| Wheelbase | 126” (320 cm) |
| Length | 182” (462 cm); 193” (490 cm) with pushbar and winch |
| Body Width | Chassis width: 72” Width at tire: 79.25” (201 cm) Width with side box: 85” (216 cm) |
| Height | 72” (183 cm) Adjustable |
| Curb Weight | 7300 lb. (3311 kg) |
| Payload | 5700 lb. (2585 kg) |
| Gross Vehicle Weight | 13,000 lb. (5897 kg) |
| Approach Angle | 73.4º/55.5º w/pushbar & winch |
| Departure Angle | 53.1º |
| Ramp Over Angle | 146.7º |
| Vertical Step | 18” (45.7 cm); 24” (61 cm) diagonal |
| Ground Clearance | 14” (35 cm) |
| Fuel Capacity | 23 gal. (87.5 L) |
| Chassis | Tubular Space Frame |
| Roll Cage | Integrated roll cages meets FMVSS 216 & SAE J2422 CH #5 & 6 |
| PERFORMANCE | |
| Top Speed | 95 mph (153 kph) |
| Cruising Range | 300 miles (483km) at Mission Profile; 500 miles on flat ground at 40 mph (1,046 km) |
| Maximum Grade | 60% |
| Dynamic Side Slope | 40% |
| Turning Radius | 40 ft. (12.19 m) curb to curb |
| Fording | 30” no prep (76 cm) |
| POWERTRAIN | |
| Engine Type | 2.0 L GM DOHC BiTurbocharged intercooled JP8/F24/Diesel Direct Injection Common Rail Fuel System |
| Horsepower/Torque | 220 HP (164KW)/ 332 ft.-lb(450 Nm) |
| Transmission Type | Automatic power shift 6 speed (Tiptronic) |
| Torque Converter | Lockable |
| Differentials | Limited slip-front and limited-slip locking rear |
| Transfer Case | 2 speed, high 4×2 or low full time 4×4 |
| SUBSYSTEMS | |
| HD Suspension, f/r | 4-wheel coil over shocks independent adjustable suspension with 4 air spring variable ride |
| Service Brakes, f/r | Power assist 4-wheel disc with ABS |
| Wheel and Tire Size | Wheel size 37 x 13.5 R17 load range E with bead lock and VFI run flat |
| ELECTRICAL | |
| 12V Alternator | 12V, 140 amp |
| 12 V/28V Alternator | 12V/28V, 50/210 amp |
*Information / Configuration subject to change without notice – please confirm specific configuration requirements prior to order.
